| Stroevemotorsport.nl

Bedrijfsgegevens
Stroeve Motorsport
Kruiwiel 6a
7773 NL Hardenberg
Tel. 0523-266216
info@stroevemotorsport.nl

Openingstijden

Ma	9.30-12.30	13.30-17.30
Di	Gesloten
Wo	9.30-12.30	13.30-17.30
Do	9.30-12.30	13.30-17.30
Vr	9.30-12.30	13.30-17.30
Za	9.30-15.30

shopping_cart

Zoeken op automerk

Webshop categorieën

Spoorverbreders

Totaal producten online

Zoek op bestelnummer

Zoek op trefwoord

Stroeve motorsport

Veilig betalen

Social media

Uw winkelwagen:

Aantal

Product afbeelding

Product naam

Prijs

Opties

PFF1-812, Alfa Romeo 147 (2000-2010), 156 (1997-2007), GT (2003-2010), Front Lower Wishbone Rear Bush These bushes are designed to fit genuine control arms. If non genuine arms are fitted and you find the stainless steel sleeve not to fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. There can be an issue with the pin diameter for PFF1-812 sleeves on non-genuine arms. The genuine arms have a pin diameter of 20mm, the non genuine arms have a pin diameter of 21.3mm. If you have arms with 21.3mm pin for the 812 bush then please telephone and we will send you replacements. PFF1-812 kit also comes with different sized rings. Select the correct ring depending on the rear bracket fitted. Use smaller ring (802b) with the aluminium bracket and 802c with the pressed steel bracket. It is only possible to fit these bushes after removing the arms from the car. For arms fitted with the pressed steel rear bracket the rubber bush may need to be burned out using a blowtorch, then the bracket cleaned up to ensure a good surface. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM, 2 stuk(s) benodigd per auto, 2 stuk(s) in verpakking, prijs per set van 2 stuk(s)_image

PFF1-812, Alfa Romeo 147 (2000-2010), 156 (1997-2007), GT (2003-2010), Front Lower Wishbone Rear Bush These bushes are designed to fit genuine control arms. If non genuine arms are fitted and you find the stainless steel sleeve not to fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. There can be an issue with the pin diameter for PFF1-812 sleeves on non-genuine arms. The genuine arms have a pin diameter of 20mm, the non genuine arms have a pin diameter of 21.3mm. If you have arms with 21.3mm pin for the 812 bush then please telephone and we will send you replacements. PFF1-812 kit also comes with different sized rings. Select the correct ring depending on the rear bracket fitted. Use smaller ring (802b) with the aluminium bracket and 802c with the pressed steel bracket. It is only possible to fit these bushes after removing the arms from the car. For arms fitted with the pressed steel rear bracket the rubber bush may need to be burned out using a blowtorch, then the bracket cleaned up to ensure a good surface. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM, 2 stuk(s) benodigd per auto, 2 stuk(s) in verpakking, prijs per set van 2 stuk(s)

Prijs p/s € 117.71

Totaal € 117.71

verwijderen

Totaal: € 117.71

Opmerkingen die van belang zijn voor u bestelling:
(Let op: Klik op 'opslaan' om de opmerking op te slaan!)

verder shoppen

afrekenen